Ammonia Remover
Ammonia Remover
How do you remove recently applied Water based tinted floor polish from only parts of a floor?
We are trying to finish our floorboards - we have applied a clear coat of Cabot's CFP water based satin, then another coat of same, tinted with black. We messed up!! Anyone know if we can remove a section that has been bunged up? There are some patches that are too thick and some overlapping probs. We can re-sand the area but would prefer to maybe strip it? I think an ammonia based remover would work but would like to hear fist hand.
Thanks.
The problem you have is not easy to fix because whatever product you use to remove the 2nd coat with stain or parts of it, will also eat into the first coat and you could finnish up with a total disaster. You may very well finish up stripping or sanding the Lot! However, you could try your ammonia based remover in a diluted form or you could try some methylated spirits, first diluted then adding in concentration until you have some thing that's workable. If it doen't look like it's going to work then cut your losses and sand it back to bare wood. If it does work try first in the centre of a blodge or lapmark and feather it towards the edges to minimise the effect. once you've done this to the whole floor, you could then touch up the affected areas with more tinted CFP, again feathering it out towards the edges. If that looks reasonable put another coat on the whole floor and it should come up OK. Normally however the stain goes on first, having tried it on a spare piece of wood, followed by at least 2 to 3 clear coats, always working along the grain of 3 to 4 boards,whatever is within easy reach. Always work quickly to avoid lapmarks. Good luck.
![]() |
![]() FRITZ AMMONIA REMOVER 5 GAL TREATS 9600 GALLONS US $179.22
|
![]() Aqua Clear 50 200 Ammonia Remover 45 oz x 96pk US $172.03
|
![]() Fluval C2 Ammonia Remover 3 pk Filter Media x 72 Case US $140.05
|
![]() Kordon AmQuel® Ammonia Chloramine Remover 5gal US $129.97
|
![]() Fluval C4 Ammonia Remover 3 pk Filter Media x 24 Case US $107.85
|
![]() Fluval C3 Ammonia Remover 3 pk Filter Media x 36 Case US $99.74
|
![]() Fluval Ammonia Remover 3x 180 gram 3pk Media x 24pk US $92.58
|
![]() 368438 Marplex Chlorine And Ammonia Remover Case of 48 US $64.67
|
![]() 10x Ammonia Nitrite Remover Sponge 103x63 NH3 NO2 US $59.99
|
![]() Brand New MARS FISHCARE POND 3 PACK AMMO LOCK AMMONIA REMOVER Size 16 OUNCE US $58.63
|
![]() FRITZ AMMONIA REMOVER 1 GAL TREATS 2400 GALLONS US $48.41
|
![]() Kordon AmQuel® Ammonia Chloramine Remover 1gal US $43.49
|
![]() Fluval Premium Select Ammonia Remover 2800 g Jar A 1487 US $41.62
|
![]() Ammonia Absorbing Remove Stones for Ponds Aquarium US $39.99
|
![]() 50 LBS Zeolite Clinoptilolite Aquarium Ammonia Remover Organic Fertilizer Soil US $39.99
|
![]() Fluval C3 Ammonia Remover 3 pk Filter Media x 12 Case US $38.34
|
![]() 3xHagen Fluval Ammonia Remover 100 gram 3pk nylon bags Filter Media 404 405 406 US $34.99
|
![]() 15 POUND BULK AQUARIUM ZEOLITE AMMONIA REMOVER FILTER US $32.95
|
![]() Fluval C4 Ammonia Remover 3 pk Filter Media x 6 Case US $32.48
|
![]() NEW Fluval Premium Ammonia Remover 1600 Gram Jar A 1486 US $32.07
|
![]() Bulk Aquarium Zeolite Ammonia Remover 15 pounds US $29.99
|
![]() Fluval C2 Ammonia Remover 3 pk Filter Media x 12 Case US $29.91
|
![]() Aqua Clear 50 200 Ammonia Remover 45 oz x 12pk US $29.52
|
![]() Fluval Ammonia Remover 3x 180 gram 3pk Media x 6pk US $28.68
|
![]() 20 LBS Zeolite Clinoptilolite Aquarium Ammonia Remover US $27.98
|
![]() Brand New KORDON 6 PACK AMQUEL AMMONIA CHLORAMINE REMOVER Size 1 OUNCE US $27.82
|
Underwater Garden~Starring Beta Siamese & 6 fish friends



US $179.22
























