Sump Return
Sump Return
Five steps for eradicating mold with an attic clean up
<p>If you want to get rid of <a href="http://www.doh.wa.gov/ehp/ts/IAQ/GOT_Mold.html">mold</a> from your attic then you will need to prepare for an attic clean up. Mold remediation is important because ignoring mold can lead to all sorts of health and financial problems. You want to tackle the problem swiftly and effectively. In the rest of this article we will examine how you will actually go about eradicate mold from your attic in five simple steps.</p>
<ul>
<li>Step 1 – assessment. You will need to do a full assessment before commencing any attic clean up. This means checking all over your attic to make sure that you have seen the full extent of your mold problem. You don’t want to complete your attic clean up only to find that you have missed half of it. If you have a Lot of <a href="http://www.allergynursing.com/moldy/health_hazards.html">mold</a> then you may want to consider bringing in some expert help. If you are pregnant then don’t try and deal with this yourself because mold has been associated with miscarriage.</li>
<li>Step 2 – isolation. You want to remove everything from your attic that has not been affected by the mold. When you are doing the attic clean up you may put mold spores into the air and you don’t want these spreading to other objects you have in your attic. Moving things out will also give you a chance to fully investigate the extent of your problem. You will then want to seal this area off until after the clean up to prevent the spread of spores.</li>
<li>Step 3 – Attic clean up. In the past the common wisdom was to just use Water mixed with bleach which you would use to soak the mold area for fifteen minutes. There are now quite a few people who claim that bleach is not so effective and that you should use chemicals especially designed for killing mold. No matter which method you try just make sure you follow directions.</li>
<li>Step 4- Prevent a return of mold to that area. For this you can apply a borate-based solution to the area and leave it; don’t rinse this off.</li>
<li>Step 5 – Remove the conditions that allowed mold to grow. You will need to do a full assessment of your attic to find out why <a href="http://www.prweb.com/releases/2009/11/prweb3232854.htm">mold.</a> grew in the first place and remedy this situation. In most instances it will be due to poor ventilation, but you should also check for any possible water leakage from pipes or coming from outdoors.</li></ul></p>
About the Author
Charles Boday is a Certified Mold Inspector and Contractor, graduate from Certified Mold Inspector & Contractors Institute. He has worked with some of the countries top scientists seeking alternative poison-free mold remediation techniques. He has testified as an expert foundation witness and is the Author of the books, The Ultra Dry Basement.
 |
 700 GPH Water Pump Aquarium Koi Pond Fountain Reef Sump Return 2600 liter New  US $29.95
|
 700 GPH Aquarium Pond Water Pump Submersible Fountain Sump Return Wet Dry US $28.95
|
 Dual Nozzle Loc Line 1 2 Modular Pipe Sump Return US $24.95
|
 for sale 2 set of 2 loc line 3 4 Modular Pipe Sump Return US $20.00
|
 Water Pump 500 GPH Aquarium Pond Fountain Reef Sump Return Wet Dry New US $19.95
|
 12 Loc Line 3 4 Flexible Modular Pipe Aquarium reef Sump Return plumbing US $13.78
|
 Loc Line 3 4 NPT Male Ball Valve Sump Return Fitting US $9.95
|
 Loc Line 3 4 In Line Ball Valve Sump Return Fitting US $9.95
|
 Aquarium Sump Canister Return U Pipe directional Flare US $8.95
|
 Loc Line 1 2 In Line Ball Valve Sump Return Fitting US $7.95
|
 Loc Line 1 4 In Line Ball Valve Sump Return Fitting US $6.95
|
 Loc Line 3 4 x 1 2 Y Reducer Adapter Sump Return US $4.95
|
 Loc Line 90 Elbow Ball Socket Sump Return 3 4 Fitting US $4.95
|
 Loc Line 1 2 90 degree Spray Bar Sump Return Fitting US $4.74
|
 Loc Line 2 1 2 Flare Nozzle Sump Return 1 2 Fitting US $4.50
|
 Loc Line 90 Elbow Ball Socket Sump Return 1 2 Fitting US $3.95
|
 Loc Line 1 4 Y Ball Socket Sump Return Fitting US $3.95
|
 Loc Line 1 2 x 1 4 Y Reducer Adapter Sump Return US $3.95
|
 Loc Line 1 2 Y Ball Socket Sump Return Fitting US $3.95
|
 Loc Line 3 4 x 1 2 Reducer Adapter Sump Return US $3.95
|
 Loc Line 1 1 4 Flare Nozzle Sump Return 1 2 Fitting US $3.95
|
 Loc Line 1 Flare Nozzle Sump Return 1 4 Fitting US $3.95
|
 Loc Line Side Flow Nozzle Sump Return 1 2 Fitting US $3.50
|
 Loc Line 1 2 x 3 8 Nozzle Sump Return Fitting US $2.95
|
 Loc Line 3 4 Modular Pipe Nozzle Sump Return Fitting US $2.95
|
 Loc Line 1 2 Modular Pipe Nozzle Sump Return Fitting US $2.95
|
DIY PVC OverFlow / Sump / Return Spraybar
